Edit pages and blocks
Summary
Section titled “Summary”Each page of your KonversAI website is built from parts: a big welcome, text, pictures, questions and answers, a booking calendar and so on. You edit a page in the page editor of the KonversAI console. Select Website > Pages in the left sidebar, then select Edit next to a page. The page editor shows the page itself, and you change it right there: type in a heading or short text, or click a picture, a link or a card to change it in a small window. The pages of your website are listed on the left. KonversAI saves every change by itself a moment later. Visitors see your changes only when you select Publish page or Publish changes in the toolbar above the page.
Who can do this
Section titled “Who can do this”Editing website pages needs the View knowledge base and Modify knowledge base permissions in the KonversAI console, because every website page is also a knowledge-base document. A Tenant Admin always has both. Without View knowledge base, Pages is missing under Website in the left sidebar. Ask a Tenant Admin to change your role on Settings > Users & permissions.
Before you start
Section titled “Before you start”The Website add-on must be on and your website must have at least one page. When the KonversAI website has no pages yet, Website opens the start guide instead. See Create your website.
The booking, form and event parts show your own calendars, forms and events. Set those up first under Booking and Forms in the left sidebar. The Chat invitation part and the Booking part need a chat widget that is switched on under Settings > Entry-points.
Change text, pictures and links
Section titled “Change text, pictures and links”- In the KonversAI console, select Website > Pages in the left sidebar, then select Edit next to the page. The page opens in the page editor. To edit another page, select it in the list of pages beside the page.
- Choose Computer or Phone above the page to see it at that screen size.
- To change a heading or a short text, click it on the page and type. Press Enter to finish a heading.
- Click longer formatted text, a picture, a card, a question or a customer quote to change it in a window. Select Done to keep the change, or Cancel to put it back as it was.
- Point at a button or a link to show two small buttons: the pencil (Edit link) changes the text and where the link goes, and the arrow (Go to the link) opens the page it leads to. Clicking the button or link itself also opens it for editing.
- Empty places for text show as a light + line, for example + Introduction. Click one to fill it in. A part with nothing to show yet, such as a Form part with no form chosen, says so: click it to set it up.
- To add a card, a button, a question or a picture to a part, click the dashed + Add… box at the end of it.
Change all the settings of a part
Section titled “Change all the settings of a part”- Click a part to select it. Its label shows above it, with Edit.
- Select Edit, or double-click an empty spot in the part. The window shows all the part’s fields on the Content tab, and its width and place on the Layout tab.
A part with a problem has a red label, and Edit shows the field to fix.
Add a part
Section titled “Add a part”- Select + Add a part at the top of the page editor. The dialog Add a part to the page lists every kind of part with a one-line description.
- Select a part. KonversAI puts the new part below the part you have selected, and opens its fields.
Move, size and remove parts
Section titled “Move, size and remove parts”- To move a part, drag its label on the page to the new place. Or select Edit, open the Layout tab and select Move up or Move down.
- To make a part narrower, drag its right edge on the page. Or choose a Width on the Layout tab: Full, 3/4, 2/3, 1/2, 1/3 or 1/4.
- On the Layout tab, select Duplicate to copy the part, or Delete to remove the part.
Widths work on a grid of 12 columns on a computer. Parts next to each other share a row while their widths fit in 12 columns, for example two parts at 1/2. On a phone every part takes the full width. You change widths only with Computer chosen above the page.
Your changes save by themselves
Section titled “Your changes save by themselves”- Change anything on the page. A moment later the toolbar above the page shows Saving…, then a message such as All changes saved. Publish the page to put it on your website.
- Select Undo or Redo at the left of the toolbar to step back or forward. The keys Ctrl+Z and Ctrl+Shift+Z do the same, with Cmd on a Mac. Typing into one field undoes as one step.
- Select Preview in the toolbar to open the page as it looks with your changes.
Everything you change in the KonversAI page editor is saved, but visitors do not see it yet. The changes are the page’s working copy. Visitors keep seeing the published page until you publish. The page’s state shows next to its title: Draft, Live, or Live · changes not published. In the list of pages on the left, a small dot marks a published page with changes that are not published.
When you leave the page editor, KonversAI keeps your work. Only while a save is still running, or after a save failed, does the browser ask Some changes are not saved yet. Leave anyway?
When a change is not saved
Section titled “When a change is not saved”- Changes could not be saved. Select Try again.
- Not saved: fix the field marked in red. Open the part with the red label, correct the field, and KonversAI saves again.
- When the page was changed somewhere else, such as in another tab, by a colleague or by the AI writer, the KonversAI page editor says so and stops saving. Select Load the latest version to go on from that version.
Choose where a link goes
Section titled “Choose where a link goes”- On a button or link field, open Where the link goes. Choose No link, one of Your pages, Open the chat, or Another address… for a web address, an email address or a phone number.
Publish the page
Section titled “Publish the page”- In the toolbar of the KonversAI page editor, select Publish page on a page that is not on your website yet. On a page that is already published, select Publish changes.
- KonversAI says Published. The page is on your website. or Published. Visitors now see your changes. The button then reads Published until you change something again.
Publishing checks that every required field is filled in. When one is missing, KonversAI opens the part with the problem and marks it red. Visitors only see published pages, and only after the whole website is published. Until then the toolbar says All changes saved. Your website itself is not published yet.
Discard changes on a published page
Section titled “Discard changes on a published page”- On a published page with changes that are not published, select Discard changes in the toolbar.
- In the dialog Discard changes?, select Discard changes. The page goes back to what visitors see now. Changes you have not published are lost.
Change the page settings
Section titled “Change the page settings”- Select Page settings at the top of the page editor.
- Under Title, Google and sharing, change Page title, Title in Google, Description in Google and Picture when shared. These are saved with the page’s text. Visitors see them once you publish the page.
- Under Address and menus, change Address of this page and Name in menus. Switch on Show in the header menu to list the page in the menu at the top of every page, or Show in the footer to list the page at the bottom of every page. Legal pages, such as the privacy policy, usually go in the footer only.
- Under Address and menus, switch on Hide this page from search engines to keep a page out of Google. Visitors with the link can still open the page.
The settings under Address and menus apply right away, also on a published page. Each field saves when you leave the field or flip the switch, and KonversAI says Saved. Address and menus are updated on your website. In the list of pages on the left, the page you are editing also has an In menu switch, which applies at once.
Take a page off your website
Section titled “Take a page off your website”- Select Page settings, then Take off website.
- In the dialog Take this page off your website?, select Take off website. Visitors can no longer open the page, and the assistant stops answering from the page. Your text stays in the page editor, and you can publish the page again any time.
Rewrite the page with AI
Section titled “Rewrite the page with AI”- Select Rewrite with AI in the KonversAI page editor. Write what should be different under What should be different? (optional), then select Rewrite.
- Look the new text over on the page. Select Undo to take the new text back.
On a published page the AI writes the working copy. Visitors keep seeing the current page until you publish the new text, and Discard changes brings the current text back. The privacy policy and the cookie page have no Rewrite with AI button, because the AI never writes legal pages.
The parts you can add
Section titled “The parts you can add”Each line names the part as the KonversAI console shows it in Add a part to the page.
- Big welcome — a large opening with a heading, a short text, a picture and up to two buttons. Layout puts the picture behind the text, beside the text, centred, or leaves it out.
- Text — a heading and formatted text, left-aligned or centred.
- Picture — one picture with a caption, at normal, wide or full width.
- Gallery — a grid of pictures, or a row of partner and customer logos.
- Slideshow — pictures that slide past, each with an optional heading, text and link.
- Cards — two to four columns of cards for services, team members or reasons to choose you.
- Invitation with button — a short, eye-catching invitation with one button, in your colour, light or dark.
- Customer quotes — what your customers say about you.
- Questions and answers — common questions. Google and the chat assistant read these too.
- Contact details — phone, email and address from Business info, with your opening hours and a map link.
- Opening hours — your opening hours from Business info, including holidays.
- Products — products from your product list. Choose none to show all of them. When you sell with payment links, products you can sell get a Buy now button.
- Chat invitation — an invitation to ask a question, with a button that opens the chat.
- Booking — your booking calendar, so visitors can book on the page.
- Form — one of your forms, on the page.
- Events — the coming dates of your events, with sign-up. Show one event, several that visitors choose between, or all of them, in the events calendar.
- Video — a YouTube or Vimeo video. The video loads only when the visitor presses play.
- Custom code — your own HTML and scripts, such as a booking tool or a map from another service. The fields are Name, HTML and Needs consent for. The code runs only on your own domain. See Set up the cookie banner and your own code.
When do visitors see my changes?
Section titled “When do visitors see my changes?”Only after you publish them. The KonversAI page editor saves every change by itself, as the page’s working copy, and visitors keep seeing the published page. Select Publish page to put a draft page on your website, or Publish changes to show the changes on a published page. On a published page, Discard changes puts the working copy back to what visitors see. The page’s state shows next to its title: Draft, Live, or Live · changes not published. To take a page off your website, open Page settings and select Take off website. Your text stays, and you can publish the page again. Settings under Address and menus in Page settings are the exception: they apply right away.
How do I put two parts side by side?
Section titled “How do I put two parts side by side?”In the KonversAI page editor, choose Computer above the page. Select the first part, select Edit, open the Layout tab, and choose a Width such as 1/2. Do the same for the part right after it. Parts next to each other share a row while their widths fit in 12 columns, so 1/2 and 1/2, or 2/3 and 1/3, fit on one row. You can also drag the right edge of a part on the page. On a phone every part takes the full width, one below the other.
How does the chat invitation part work?
Section titled “How does the chat invitation part work?”The Chat invitation part shows a heading, a text and a button. A visitor who selects the button opens the chat bubble on your KonversAI website and can ask the assistant a question. When the chat bubble is turned off under Look & feel, the button opens the chat on a separate page instead. Any button or link set to Open the chat under Where the link goes works the same way.
How do I let visitors book on my website?
Section titled “How do I let visitors book on my website?”Add the Booking part to a page. Under Calendar, choose one calendar, or leave it empty to offer all your calendars. The Booking part needs the Calendar feature and a chat widget that is switched on. Without a chat widget, the page shows Online booking is not available right now. Please get in touch instead. When you have no calendars, the editor says You have no booking calendars yet.
How do I put a form or an event on a page?
Section titled “How do I put a form or an event on a page?”Add the Form part and choose a form under Form, or add the Events part and tick the events to show under Events. The part shows your events calendar with sign-up: tick one event to show only that one, several for visitors to pick between, or leave All events ticked to show every published event. The form is required. When you have none, the KonversAI editor says You have no forms yet. or You have no events yet. Create the form under Forms or the event under Booking first, then come back to the page editor.
Can I rewrite a page with AI after I have changed it?
Section titled “Can I rewrite a page with AI after I have changed it?”Yes, on a draft page and on a published page. Select Rewrite with AI in the KonversAI page editor, write what should be different under What should be different? (optional), and select Rewrite. The new text replaces the page text in the editor, so look it over on the page. Select Undo to take the new text back. On a published page the AI writes the working copy: visitors keep seeing the current page until you select Publish changes, and Discard changes brings the current text back. The privacy policy and the cookie page have no Rewrite with AI button, because the AI never writes legal pages.
Can I add my own HTML or code to a page?
Section titled “Can I add my own HTML or code to a page?”Yes. Add the Custom code part to the page and paste your HTML or script into HTML. Under Needs consent for, choose which kind of cookie the code needs, so the cookie banner holds the code back until the visitor allows it. The code runs only on your own domain. In the page editor, in the preview and on the KonversAI address of your website, the code runs in a closed box, so code that needs the rest of the page may not work there. For code on every page, such as an analytics tag, use Website > Cookies & code. See Set up the cookie banner and your own code.
What happens to links when I change the address of a page?
Section titled “What happens to links when I change the address of a page?”A new Address of this page under Page settings applies right away, also on a published page. The menu of your KonversAI website follows the new address. Buttons and links you pointed at the page in other parts keep the old address, so open those parts and choose the page again under Where the link goes. Links people have saved, and links on other websites, stop working. Change Address of this page under Page settings only when you need to.
Which page is the home page?
Section titled “Which page is the home page?”The page marked Home page on Your website is the page visitors see first, at the main address of your KonversAI website. To choose another page, select Make home page next to it on Website > Pages.
Last reviewed . Tell us when a step no longer matches the product.